Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Scratched up Head
#2
if the pins are missing 2 horrable results
1: gasket backward now tiny .050" OIL oriface is blocked,and cam and valve seizer.
2: ;cam belt never runs true ever then shreads.

not good.
http://www.fixkick.com
Reply


Messages In This Thread
Scratched up Head - by Samistine - 02-02-2019, 01:57 PM
RE: Scratched up Head - by fixkick - 02-03-2019, 12:59 AM
RE: Scratched up Head - by Samistine - 02-03-2019, 03:36 AM
RE: Scratched up Head - by fixkick - 02-03-2019, 12:12 PM
RE: Scratched up Head - by Samistine - 02-04-2019, 09:53 AM
RE: Scratched up Head - by fixkick - 02-04-2019, 12:15 PM
RE: Scratched up Head - by fixkick - 02-04-2019, 12:20 PM
RE: Scratched up Head - by Samistine - 02-04-2019, 12:50 PM
RE: Scratched up Head - by fixkick - 02-04-2019, 11:08 PM
RE: Scratched up Head - by fixkick - 02-04-2019, 11:22 PM
RE: Scratched up Head - by Samistine - 02-05-2019, 02:13 AM
RE: Scratched up Head - by Samistine - 02-06-2019, 05:48 AM
RE: Scratched up Head - by fixkick - 02-06-2019, 10:00 PM
RE: Scratched up Head - by fixkick - 02-06-2019, 10:24 PM
RE: Scratched up Head - by Samistine - 02-07-2019, 12:49 AM
RE: Scratched up Head - by fixkick - 02-07-2019, 01:48 AM
RE: Scratched up Head - by Samistine - 02-07-2019, 01:18 AM
RE: Scratched up Head - by fixkick - 02-07-2019, 01:56 AM
RE: Scratched up Head - by fixkick - 02-07-2019, 02:03 AM
RE: Scratched up Head - by Samistine - 02-07-2019, 11:43 PM
RE: Scratched up Head - by fixkick - 02-09-2019, 12:47 AM
RE: Scratched up Head - by fixkick - 02-09-2019, 01:01 AM
RE: Scratched up Head - by fixkick - 02-09-2019, 01:02 AM
RE: Scratched up Head - by fixkick - 02-09-2019, 01:10 AM
RE: Scratched up Head - by Samistine - 02-13-2019, 12:08 AM
RE: Scratched up Head - by Samistine - 02-14-2019, 11:53 PM
RE: Scratched up Head - by fixkick - 02-15-2019, 12:47 AM
RE: Scratched up Head - by Samistine - 02-15-2019, 01:54 AM
RE: Scratched up Head - by fixkick - 02-15-2019, 02:33 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)