01-22-2019, 02:15 AM
Well had a good maiden voyage after sorting out my x90, but not without incident,
Smelled coolant for a while and couldn’t find leak, thought I found it prior to heading out, thought it was the heater core so I bypassed it for a quick fix, only to find it’s the hose that goes to the rear of the cylinder head.
I reviewed the drawings and was happy that it was a hose and not the heater core, my one question on this is , the drawing shows a 2 bolt housing with a gasket , I hand not pulled the hose yet to see if it has a hole in it, but the housing with the gasket has me concerned as it’s pretty tight back there?
Smelled coolant for a while and couldn’t find leak, thought I found it prior to heading out, thought it was the heater core so I bypassed it for a quick fix, only to find it’s the hose that goes to the rear of the cylinder head.
I reviewed the drawings and was happy that it was a hose and not the heater core, my one question on this is , the drawing shows a 2 bolt housing with a gasket , I hand not pulled the hose yet to see if it has a hole in it, but the housing with the gasket has me concerned as it’s pretty tight back there?