12-19-2018, 10:04 AM
I installed the new TPS and calibrated it according to the instructions I found on this site. I'm pretty confident it is calibrated correctly. I have replaced the spark plugs and gapped them to .028. I have not done wires,cap, rotor.
I have driven it for a couple days with the new TPS and I am getting a fault 22 again (I believe this is the same TPS related fault I mentioned above. I said 21 but i think it acutally was 22). Having already replaced the TPS with a new part, what else should I be looking for on this fault 22? I am hoping this is causing the hesitation/stuttering because with the TPS unplugged I never have the issue.
I have driven it for a couple days with the new TPS and I am getting a fault 22 again (I believe this is the same TPS related fault I mentioned above. I said 21 but i think it acutally was 22). Having already replaced the TPS with a new part, what else should I be looking for on this fault 22? I am hoping this is causing the hesitation/stuttering because with the TPS unplugged I never have the issue.