12-01-2018, 05:18 AM
sure just cut the mount and extend it with steel plate weld back to where this is some slack.
I agree, seems like you have all figured out, thanks for sharing.
and the shared, links . love those !
I agree, seems like you have all figured out, thanks for sharing.
and the shared, links . love those !
(12-01-2018, 03:09 AM)redline814 Wrote: Reaches the mount...but I would prefer there be more slack. I had to pull it fairly tight. I might make a different bracket. One that moved the bottom cable mount a few inches back. That way I may not have to worry about the wire connector getting wound up in the sheath. I already ordered the motorcycle parts you mentioned to complete the job!
I will weld an extension on the existing plate and move it back.
BTW - Here is the detail of replacing the cable (lots of pictures). https://www.pirate4x4.com/forum/suzuki/2...floor.html
http://www.fixkick.com