10-16-2018, 06:34 AM
Ok. I have some great pics to share later when i get on my pc. But YES you must disconnect the cable at the throttle body!!!! But not all the way.. i just loosned the stop nut and removed the cable from the bracket on the throttle body. But the end cable is still attached at the "bell" i went back under and pulled the cable and it poped right out. There is a hole in the plunger that the tv cable slides into... sadly my O ring looks just fine.. the rubber sheef is torn but the metal cable body sheef is not cracked. Im going to slather the exposed cable body metal in rtv (i dont think that could leak??? Rtv is for rust prevention) then replace the O ring with a universal kit O ring.. going back together looks..... not fun