89 Clutch Replacement

[fixkick]

the distributor seals made all this nasty mess, 1997 and bad VC seal.
http://www.fixkick.com/engine/97-motor-p...age_5.html


fly locker, for 2 uses , front pulley at 94ft/lbs NOW
and installing PP. pressure plate
http://www.fixkick.com/engine/97-motor-p...ge_38.html

for those reading the 16v can leak 4 ways to the rear, 2 dizzy o-rings old hard cracked, bad VC gasket, and these to covered in them FSM steps
http://www.fixkick.com/engine/97-motor-p...ge_45.html
if not done flood city.. to rear.

and last why EBAY parts from china suck
http://www.fixkick.com/engine/97-motor-p...ge_63.html

not just bit off, but miles off, course.
finding some gaskets is not easy.
Felpro is first stop, for gaskets, I go to NAPA and they sell them.
The PAN is RTV glued on in the factory and pressure tested there. and never leaks, ever, unless molested. (sadly some leak free engines, the pan rusts through, ouch)