09-25-2018, 06:02 AM
95% of most no pro shops that do head work fail soon after job done or after the 30 day warranty
this is reported by the head builders association,
there are many reasons, but the top 3 are.
1: head or deck warped out of spec.
2: china junk gaskets. ( by Felpro and win !!!)
3: the head or deck milled to roughly or too smooth , the gasket must creep at each start and cool cycle of the engine if not it fails that gasket.
this is reported by the head builders association,
there are many reasons, but the top 3 are.
1: head or deck warped out of spec.
2: china junk gaskets. ( by Felpro and win !!!)
3: the head or deck milled to roughly or too smooth , the gasket must creep at each start and cool cycle of the engine if not it fails that gasket.
http://www.fixkick.com