used the wrong gasket on the head
the head is cracked or freeze plug top side of head blown or rusted through , AF in the oil.
gasket put on backwards
gasket from CHINA ebay maker name Unknown or impossilbe to say in English.
head warped, not check buy mech.,.but all machine shops do step 1 or go out of business in days time.
block deck warped, same test ruler test above, same rules.
used gasket cement even though , Felpro (top maker of gaskets usa) told him NEVER DO THAT ever.
cylinders cracked, #3 ... block not pressure tested or not inspected for cracks piston OUT.
and the like....
IMO
the head is cracked or freeze plug top side of head blown or rusted through , AF in the oil.
gasket put on backwards
gasket from CHINA ebay maker name Unknown or impossilbe to say in English.
head warped, not check buy mech.,.but all machine shops do step 1 or go out of business in days time.
block deck warped, same test ruler test above, same rules.
used gasket cement even though , Felpro (top maker of gaskets usa) told him NEVER DO THAT ever.
cylinders cracked, #3 ... block not pressure tested or not inspected for cracks piston OUT.
and the like....
IMO
http://www.fixkick.com