07-27-2018, 11:27 PM
Yeah they are off a 2 door... 1.6
So I managed to get the whole thing apart and cleaned and lubed with some white lithium grease. The hub is still pretty stiff to turn. It’s also hard to turn the splines with my finger, if I remember correctly the inside part should spin with little to no resistance. The clicking is gone but it still doesn’t seem 100%.
So I managed to get the whole thing apart and cleaned and lubed with some white lithium grease. The hub is still pretty stiff to turn. It’s also hard to turn the splines with my finger, if I remember correctly the inside part should spin with little to no resistance. The clicking is gone but it still doesn’t seem 100%.