07-13-2018, 12:29 PM
one guy on the forum put the pump on the rack then forgot to connect the pump wires. at pump. (distractions from his wife or kids will do that)
use the meter across the pump, 2 leads there.
if 12vdc is across the pump and it is dead, the pump is bad. (rare that on new pumps) but do smack it one time to maybe get the brushes inside to make connections.
use the meter across the pump, 2 leads there.
if 12vdc is across the pump and it is dead, the pump is bad. (rare that on new pumps) but do smack it one time to maybe get the brushes inside to make connections.
http://www.fixkick.com