Clunk when coming to a stop

[CSUSBgeochem1]

glad you brought the picture in. I still have the #17 bracket, it was the #23 bushings i wanted replaced. The other two brackets, # 12 and 13, are fine, but the bushings in both (#15) are shot. it looks from your schematic that they are removable and not one piece with either #12 or 13. I bought brackets from a private seller not knowing #15 was removable so i figured the entire bracket was bad. i just need to replace part #15 as the rubber is old and shot. i will source parts for a bit and see what i can come up with