Login Register
Car Repair Forum › Suzuki › Sidekick/Tracker v
Sources for Rebuilt Cylinder Heads G16B

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sources for Rebuilt Cylinder Heads G16B
fetcher Offline
Member
***
Posts: 141
Threads: 3
Joined: Oct 2013
Reputation: 1
#11
06-11-2017, 02:52 AM (This post was last modified: 06-11-2017, 02:52 AM by fetcher.)
I think that I am getting somewhere:

   
From: http://www.zukikrawlers.com/showthread.php?t=55121
Find
Reply
fetcher Offline
Member
***
Posts: 141
Threads: 3
Joined: Oct 2013
Reputation: 1
#12
06-11-2017, 06:16 AM (This post was last modified: 06-11-2017, 06:34 AM by fetcher.)
I'm not so sure the indexing is critical. with the 13 teeth I think are on both drive and driven gear, the worst you could possibly
be off by is half a tooth or 1/26th of a circle or 13.8 degrees. Looks like there is enough room for adjustment to compensate and
put you back near the middle, or I have forgotten all about geometry.
Find
Reply
fixkick Offline
helperbee
*******
Posts: 6,091
Threads: 12
Joined: Apr 2013
Reputation: 29
#13
06-11-2017, 11:16 AM
ON 2ND THOUGHT, IDK
http://www.fixkick.com
Website Find
Reply
Samoo3 Offline
Junior Member
**
Posts: 6
Threads: 1
Joined: Sep 2017
Reputation: 0
#14
10-03-2017, 01:25 PM
Any updates?
Find
Reply
fetcher Offline
Member
***
Posts: 141
Threads: 3
Joined: Oct 2013
Reputation: 1
#15
10-08-2017, 08:01 AM
I thought I explained it. Indexing is not super critical. The distributor gear on the camshaft is press on. You can use the heads with the
reluctor if you switch it for the cam driven distributor gear.
Find
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)