Not all valve cover gasket quality the same!

[cosmic_splatter]

Here is a pic of the new felpro valve cover gasket in blue compared to the one I pulled out of the engine. You can clearly see that the felpro is much thicker and will seal better!



John

---

ps. Note ridges along the gasket to better hold it in the valve cover. Very nice!

---

Perfect fit! Like a glove!

[fixkick]

felpro is top shelf.

it might last longer too.

it even looks better than mine, they made it better yet.

good luck to you !!!

[cosmic_splatter]

I got it on Amazon. It really looks cool being blue! Here is the part number... FEL-PRO VS50473R

[fixkick]

thanks.
i posted the full catalog
here it is.
i use catalogs from source, on all buys first. so i dont get the wrong parts.
http://www.fme-cat.com/Application.aspx#passengercar


Same with Bosch part, or SMP, or NGK, all catalogs for all parts (not china imported knockoffs) are in the OEMs catalogs. now. a blessing.
the trick is to get 8v and 16v correct. very hard that. some call the 16v Kv and the 8v KC (v for van, c for canvas. 8v and 16v) tricky huh?
your tracker is a VIN 6 car. the parts listed for Vin 6 fit your car. 6 = 16v. in GM parlance......

---

with real p./n in hand, you can google for cheapest source, or closest to your home for faster and cheaper shipping.
or can ask the clerk at a brick store to find this part. faster. and not let them sell you the wrong part, as is the practice 1/2 time.
1995 had 2 engines.