Posts: 30
Threads: 1
Joined: Jul 2020
Reputation:
0
There was a bad spot on the bolt threads and the hole (about 2 threads worth), don’t know what caused it. Looks like it will clean up pretty easily with a 12mm x 1.25 thread chaser.
Having difficulty finding the bottom cog. Only place so far is an eBay listing from the Middle East. Still looking...
Posts: 30
Threads: 1
Joined: Jul 2020
Reputation:
0
Found the cog (12631-53B00) on Suzukiautomotiveparts.com for $46 shipping included. 17mm bolt is $11. No woodruff key listed on this site, may find elsewhere.
Posts: 30
Threads: 1
Joined: Jul 2020
Reputation:
0
Fixkick
Camshaft timing belt cog removed, locating pin and corresponding slot on cog look perfect. However, I do want to replace the bolt. Do you have a part number? Can’t find it.
Again, thanks for the help.
Posts: 30
Threads: 1
Joined: Jul 2020
Reputation:
0
Searched that number, isn’t that the crankshaft bolt? I need the camshaft bolt.
Posts: 30
Threads: 1
Joined: Jul 2020
Reputation:
0
Thanks a lot, I really appreciate the help.
Posts: 30
Threads: 1
Joined: Jul 2020
Reputation:
0
Thanks for the numbers, I’ll check it out.