+- Car Repair Forum (https://fixkick.com/forum)
+-- Forum: Suzuki (https://fixkick.com/forum/forum-suzuki)
+--- Forum: Sidekick/Tracker (https://fixkick.com/forum/forum-sidekick-tracker)
+--- Thread: ECU repair Question (/thread-ecu-repair-question)
ECU repair Question - Lon - 06-16-2014
If I understand this correctly , the circuit board in the ECU is 3 layer ,
and makes its connection at the "plated through holes" , correct?
my question is , how do we repair the Plated through holes if they have been eaten by leaky capacitor and how do we make sure the middle layer is receiving power.
If the middle layer is not getting power , how do we fix it?
THanks again
Lon
RE: ECU repair Question - fixkick - 06-16-2014
yes, at least 3 layer.
you cant. not easy.
i have sent power from top to bottom, via jumper but id never drill board.