Car Repair Forum
intake manifold ? - Printable Version

+- Car Repair Forum (
+-- Forum: Suzuki (
+--- Forum: Sidekick/Tracker (
+--- Thread: intake manifold ? (/thread-intake-manifold)

intake manifold ? - jonmr1 - 07-08-2013

Checked the fix kick site but maybe not well enough.
Is there a pattern to bolt down either manifold?


RE: intake manifold ? - fixkick - 07-09-2013

great question.
but on all assembles, it sure dont here to stage them all down,

i walk around the pattern, in stages, i never hall down anything, starting full torque on 1st bolt, i avoid that in general.
the torque here is small. so is not critical. like heads, and cam caps.

i think better German FSM , talk about this in the front end of every book. default methods.
cheers !