Search

Slideshow | Notify Member Updates |

injector PW at idle. hot engine MPI G16b

Add New Note

Previous Image | Next Image

Description: this is computed not from scope. just in (11/20/2020) one poster now passing calif smog. (wow) shows this on tech1 scan tool. MPI inector PW = 3.2mS hot ,idle. normal all. per injector MPI 1994 G16 his China MAF was PURE ROTTEN CRAP lies high, show too much air for REALality. the Computer engine model ,is 1.8mS +1mS (dead time) = 2.8mS 2.8mS is very close to 3.2mS real see: https://fixkick.com/forum/thread-1994-si...ere?page=4 Picture Stats: Views: 974 Filesize: 241.13kB Height: 793 Width: 753 Keywords: MPI pulse width and bad MAF  Posted by: fixkick 11-12-2020 Image Linking Codes BB Code Direct Link Html Link

Slideshow | Notify Member Updates |

Comments