|
|
| front bearings are crush type. 89-98 sidekicks | ||||||
|
||||||
| Previous Image | ||||||
| Description: the designer of said bearing, has you set the torque 123-180 foot/pounds (legit range) and like magic the gap (clearance) just happens. that is the TRUTH. 0.002" is par for play at end. I'ts not like boat trailer or the like, not at all. what you do is set the 1/2drive torque wrench to 120 then turn clock wise and hear the first click. then looking careful at the 4mm lock ring hole go to higher torque to get those holes aligned bingo down, that is all you do. Correct tools.+ many years later 2004> they use hubs that are pre loaded, and do not come apart . but are in fact torqued the same way. top brand is Timken or KOYO. Picture Stats: Views: 2264 Filesize: 19.43kB Height: 230 Width: 327 Keywords: front wheel bearings sidekick. Posted by: fixkick  05-31-2013Image Linking Codes
|
|
| Comments |
Powered by: ezGallery Pro for MyBB