Search

Slideshow | Notify Member Updates |

ECT/IAT curve (ohms over temperature)

Add New Note

Previous Image

Description: both the IAT and ECT follow this curve. the ECT is very important, the water(coolant) must get to 180F(min) and hold there. and the ECT must read near 300 ohms. if way off , you will waste fuel , and Neither the ECT nor the coolant thermostat work at all with air below the ECT, or STAT. Picture Stats: Views: 1876 Filesize: 17.22kB Height: 502 Width: 540 Posted by: hatchetman 05-31-2013 Image Linking Codes BB Code Direct Link Html Link

Slideshow | Notify Member Updates |

Comments