I was having trouble removing the security screws that hold on the ignition switch. I eventually got them off, but they aren't exactly in reusable condition. Does anyone know what type and size of screw I'd need for a replacement, and where to get them?
Thanks
(09-10-2019, 10:27 AM)digigeek19 Wrote: [ -> ]I was having trouble removing the security screws that hold on the ignition switch. I eventually got them off, but they aren't exactly in reusable condition. Does anyone know what type and size of screw I'd need for a replacement, and where to get them?
Thanks
that is normal, the heads pop off day one installed, by design.
and screw works there , they are metric, of couse.
if you take the screw to any auto store, they have them there, just normal screwss.
off my I/P cluster removal page
12 years ago I wrote this.
Buy two new 6mm OD x 20mm M6-20 pitch 1.0 long allen screws first, and the hex key to match
but might be 8mm, just take the old screws to the store.
diameter find then pitch.