+- Car Repair Forum (https://fixkick.com/forum)
+-- Forum: Suzuki (https://fixkick.com/forum/forum-suzuki)
+--- Forum: Sidekick/Tracker (https://fixkick.com/forum/forum-sidekick-tracker)
+--- Thread: Cleaning EGR Hole behind throttle body.... (/thread-cleaning-egr-hole-behind-throttle-body)
Pages:
1
2
RE: Cleaning EGR Hole behind throttle body.... - cosmic_splatter - 08-16-2014
Fixkick,
Are you talking about the hole from the top of the sidewinder tube to the intake? I took an air compressor nozzle and blew up through the top of where the sidewider tube enters the intake and it comes out into the throttle body side. The air went right in.
John
RE: Cleaning EGR Hole behind throttle body.... - fixkick - 08-16-2014
it must blow from egr suck port. to the mono port.
egr main off, there are 2 ports the bark port and the plenum suck port.
the suck port must be free. of exh, gases will not flow.
egr sucks, no> ? LOL
RE: Cleaning EGR Hole behind throttle body.... - fixkick - 08-16-2014
I lied, sorry.
also on egr, see my page here in EGR, and the 1994 rule.
USA rule, USA ECU, i do not have the cut in date on the rule, what body VIN serial number cut in date or serial, only 1994 it began.
i forgot this rule and my page shows my research on that.
http://www.fixkick.com/EGR-Gen2a.html#STALL